KOFN (Keyed Optic Fastening Network)
The KOFN (US Patent Pending) is a new, innovative return-to-zero mounting system designed to attach accessories securely and quickly to a host that has an affixed KOFN base.
To operate, install the KOFN wedge with the wider end forward towards the muzzle. Next, slide the accessory with its attached base onto the wedge until you detect (audible or feel) that the push bar snaps into place and securely locks the assembly. The push bar does not need to be depressed to lock the accessory into place. If rail space is limited, it can be depressed to allow the base to engage the wedge halfway down the channel.
Optic plates- The optic is secured to the base with the provided low strength thread locker. Make sure that any mounting fasteners are long enough to engage all the threads in the KOFN base. Zero the optic, then remove and reinstall the base to the wedge to ensure the integrity of the system. Re-check your zero.
Shotgun- Mount the Base in the two forward threaded holes on the receiver. Ensure that the threaded holes are clean and free of any oil. A cotton swab dipped in a degreaser such as acetone is recommended. Use the provided thread locker and fasteners to secure the base to the shotgun. Make sure that the two provided fasteners do not protrude into the action area where the barrel slides in. Allow the thread locker to dry completely before subjecting the KOFN system to use.
IMPORTANT- THIS MOUNT ONLY FITS THE 1301 COMP. THE 1301 TAC HAS DIFFERENT SCREW SPACING.
